Thamesgate has supplied an inert gas fire suppression and H2 gas detection system for Europe’s largest lithium-ion battery storage project in Leighton Buzzard, Bedfordshire, announced the company. The fully automated Smarter Network Storage (SNS) project is a 6MW/10MWh battery substation. S&C Electric Europe enlisted the services of Thamesgate to design, install and commission the fire suppression system. Thamesgate had previously worked with S&C on another major battery storage installation in Scotland and was chosen to supply the fire suppression and detection system at Leighton Buzzard.
The system Thamesgate designed and installed at Leighton Buzzard comprises two conventional IG55 (Argon/Nitrogen) inert gas fire suppression controllers connected to smoke detectors. The detection system comprises two VESDA (Very Early Smoke Detection Apparatus) detectors configured to provide detection for the “double- knock” arrangement of the fire suppression system. This provides an automatic fire detection and alarm system that is capable of identifying when two elements actuate simultaneously within the same zone or area.
A H2 gas detection system which samples the return air of the highest sampling pipe (SCADA alarm only) which triggers the extract system to operate in the even of the LEL (Lower Explosive Limit) being reached.
Primary smoke detection utilising VESDA smoke detectors covers the return air plenums of the cooling systems (independent of the fire suppression system) to provide advance warning of a fire incident. The system also included multiple entry points using 10 lamp status units with the facility to change mode and check gas release, discharge pressure switches, and gas release call points and hold off switches located at the exit doors.
The design required dual inert gas fire suppression cylinders. Both systems connect to a main/reserve bank of IG55 fire suppression cylinders with both main and reserve banks being sized to the largest protected volume. In-line non-return valves control the number of cylinders being released based on the area activated while a fully manual isolation facility controls mechanical isolation of the actuation lines of the fire suppression system. Main or reserve cylinders can also be selected manually.
Nick Watkins, managing director of Thamesgate Group, commented, “This project was a demanding challenge for our engineering teams being sited in two buildings with the main alarm panel remote from the gas bottles necessitating a pilot gas bottle in the reception area using fine copper tubing. Also, as commonly encountered in such large installations, there were significant changes to the specification as the project evolved to the extent that the final implementation looked very different to the original system envisaged.”
"Etiam aliquam sem ac velit feugiat elementum. Nunc eu elit velit, nec vestibulum nibh. Curabitur ultrices, diam non ullamcorper blandit, nunc lacus ornare nisi, egestas rutrum magna est id nunc. Pellentesque imperdiet malesuada quam, et rhoncus eros auctor eu.
Nullam vehicula metus ac lacus rutrum nec fermentum urna congue. Vestibulum et risus at mi ultricies sagittis quis nec ligula. Suspendisse dignissim dignissim luctus. Duis ac dictum nibh. Etiam id massa magna. Morbi molestie posuere posuere."
Mr. J.Jones. Director. S&C Electric Europe Ltd